View MN102L59D_991732.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN102L59D
Type ROM (x8-bit / x 16-bit) x RAM (x 8-bit / x 16-bit) x Package Minimum Instruction Execution Time Interrupts Timer Counter
MN102L59D 64 K 2K LQFP064-P-1414 *Lead-free With main clock operated: 100 ns (at 4.5 V to 5.5 V, 5 MHz externally, multiplied by 4 internally) * RESET * Watchdog * Timer counter 0 to 11 * External 0 to 5 * Serial ch.0, 1 transfer finish * NMI pin * A/D conversion finish Timer counter 0 : 8-bit x 1 (timer output, event count) Clock source ********************* 1/1, 1/64, 1/128 of system clock frequency; external clock Interrupt source **************** underflow of timer counter 0 Timer counter 1 : 8-bit x 1 (timer output, event count, A/D conversion start up) Clock source ********************* 1/1, 1/64 of system clock frequency; external clock; timer counter 0 output Interrupt source **************** underflow of timer counter 1 Timer counter 2 : 8-bit x 1 (timer output, event count) Clock source ********************* system clock; external clock; timer counter 0, 1 output Interrupt source **************** underflow of timer counter 2 Timer counter 3 : 8-bit x 1 (interval timer, UART baud rate generator) Clock source ********************* 1/1, 1/2, 1/64 of system clock frequency; timer counter 0 output Interrupt source **************** underflow of timer counter 3 Timer counter 4 : 8-bit x 1 (interval timer) Clock source ********************* 1/1, 1/64, 1/128 of system clock frequency; timer counter 0 output Interrupt source **************** underflow of timer counter 4 Timer counter 5 : 8-bit x 1 (interval timer) Clock source ********************* 1/1, 1/64 of system clock frequency; timer counter 0, 4 output Interrupt source **************** underflow of timer counter 5 Timer counter 6 : 16-bit x 1 (timer output, event count) Clock source ********************* 1/1, 1/128 of system clock frequency; external clock; timer counter 0 output Interrupt source **************** underflow of timer counter 6 Timer counter 7 : 16-bit x 1 (timer output, event count) Clock source ********************* 1/1, 1/128 of system clock frequency; external clock; timer counter 0 output Interrupt source **************** underflow of timer counter 7 Timer counter 8 : 8-bit x 1 (timer output, event count, simple PWM output) Clock source ********************* 1/2, 1/8 of system clock frequency; external clock; timer counter 0 output Interrupt source **************** underflow of timer counter 8 Timer counter 9 : 8-bit x 1 (timer output, event count, simple PWM output) Clock source ********************* 1/2, 1/8 of system clock frequency; external clock; timer counter 0 output Interrupt source **************** underflow of timer counter 9 Timer counter 10 : 8-bit x 1 (timer output, simple inverter control [simple 6-phase PWM output]) Clock source ********************* high-speed clock (after multiplication); 1/1, 1/2, 1/8 of system clock frequency Interrupt source **************** overflow of timer counter 10 Timer counter 11 : 16-bit updown counter x 1 (highly functional inverter control [simple 6-phase PWM output], A/D conversion start) Clock source ********************* high-speed clock (after multiplication); 1/1 of system clock frequency Interrupt source **************** overflow of timer counter 11; underflow of timer counter 11 Connectable timer counter 0, 1, 2 timer counter 0, 4, 5
MAE00001DEM
1
MN102L59D
Serial Interface
Serial 0, 1 : 1 to 8-bit x 1 (common use with half-duplex UART, transfer direction of MSB/LSB selectable) Clock source ********************* 1/2, 1/4, 1/16 of system clock, 1/2 of timer counter 3, external clock Half-duplex UART x 2 (common use with serial 0, 1)
I/O Pins A/D Inputs PWM
I/O
52
* Common use : 52 (by bit)
10-bit x 12-ch. (with S/H) : 4 channels for common use 16-bit x 2-ch. (commen use with timer counter 6,7) simple 6-phase PWM output 8-bit x 1-ch.(common use with timer counter 10) 6-phase PWM output 16-bit x 1ch. (timer counter 11) 6-phase PWM output support
Notes Electric Characteriatics
Supply current
Limit Parameter Symbol Condition VI = VDD or VSS, output open IDDopr f = 5 MHz , VDD = 5.0 V Supply current at STOP Pin with pull-up resistor is open IDDS all other input pins and Hi-Z state input/output Supply current at HALT0 pins are simultaneously applied VDD or VSS level IDDH f = 5 MHz , VDD = 5.0 V, output open (Ta = -20C to +85C , VDD = 5.0 V , VSS = 0 V)
P25,IRQ5 P24,IRQ4 P23,IRQ3 P22,IRQ2 P21,IRQ1 P20,IRQ0 P16,TMIO6 P15,TMIO5 P14,TMIO4 P13,TMIO3 P12,TMIO2 P11,TMIO1 P10,TMIO0 P02,SBO0 P01,SBI0 P00,SBT0
min
typ
max 75
Unit mA
Operating supply current
50
A
30
mA
Pin Assignment
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
P40,PWM0,TMIO0 P41,PWM0,TMIO1 P42,PWM1,TMIO2 P43,PWM1,TMIO6 P44,PWM2,TMIO7 P45,PWM2,STOP P60,TPWM0,SBT0 P61,TPWM1,SBI0 P62,TPWM2,SBO0 P63,TPWM3,SBT1 P64,TPWM4,SBI1 P65,TPWM5,SBO1 VDD
33
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
MN102L59D
NMI
64
P37,AN0 P36,AN1 P35,AN2 P34,AN3 P33,AN4 P32,AN5 P31,AN6 P30,AN7 P57,AN8 P56,AN9 P55,AN10 P54,AN11 P53 P52 P51 P50
10
11
12
13
14
15
LQFP064-P-1414 *Lead-free * The MN102LF59D is manufactured and sold under license agreement with BULL CP8 Inc.
Support Tool
In-circuit Emulator Flash Memory Built-in Type
Note that MN102LF59D cannot be used as the IC card.
PX-ICE102L00 + PX-PRB102L59-LQFP064-P-1414 Type ROM (x 8-bit / x 16-bit) RAM (x 8-bit / x 16-bit) Minimum instruction execution time Package MN102LF59D [ES (Engineering Sample) available] 64 K 2K 100 ns (at 4.5 V to 5.5 V, 5 MHz externally, multiplied by 4 internally) LQFP064-P-1414 *Lead-free
P70,BUZZ P71 P72 P73 P74 P75 P76 P77,WDOUT VSS RST VSS SYSCLK VDD OSCI OSCO VDD
16
1
2
3
4
5
6
7
8
9
MAE00001DEM
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL

▲Up To Search▲

Price & Availability of MN102L59D

	To Download MN102L59D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .